 |
T-207X
SKYCOM
T-207X
[ SKYCOM T-207X Fiber Optic Splicing Machine ]
> CE SGS CSI ISO9001 compliance
> Over 5-Year Experience in the field
> 5 patents for optical fiber fusion splicer machine
> OEM Service, Custom Make To Order
> Skycom Patented Fusion Splicer Series
> Fusion splicer is used for joining two optical fibers end-to-end using heat, to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice, and so that the splice and the region surrounding it are almost as strong as the virgin fiber itself.
> We has been dedicated to R & D, manufacturing fusion splicer for more than 5 years.
> Skycom T-207X is our latest developed product.It more concise and smaller in size.
> Our company have developed fusion splicer from 2010, and successfully obtained 5 patents for the fusion slicer research.
> Product Features of Fusion Splicer
> 5 inches high resolution colorful LCD display
> Average splice time: 10 seconds
> Average tube-heat time: 30 seconds
> Lithium battery: rechangable and up to 180 times of continuous splice and heat after fully charged.
> Simultaneous X and Y views with 400 times magnification
> Cutting-edge technology for image processing
> New developed technology providing wind and dust resistance
> Splicing mode: Auto & Manual&Full-Auto
> USB Port
> Storing 6,000 groups of splice results
> New technology of fiber core alignment, enhanced accuracy
> New 3-in-1 cutting fixture for rubber-insulated wire, pigtail & bare fiber (Patented technology)
> New Multipurpose 1+N fixture (Patented technology)
* 1+N: one 3-in-1 fixture ( for rubber-insulated wire, fiber optic pigtail, bare fiber) & optional fixtures ( for SC/LC/FC connector - T-207XF) .
> Product Parameters of Fusion Splicer
| Applicable Fibers | SM, MM, NZ-DS, EDF , Pigtail, Cable,( Rubber-insulated wire SC/LC/FC connector (optional function) |
| Average Splice Loss | 0.02dB(SM), 0.01dB(MM), 0.04dB(NZDS), 0.04dB(EDF) |
| Return Loss | ≥60dB |
| Tension Test | 2.0N(200gf)(Standard) |
| Typical splicing time | 10 seconds |
| Typical heating tim | 30 seconds |
| Splicing Program | 50 groups |
| Protection Sleeve Length | 20mm, 40mm, 60mm |
| Operating Language | Chinese, English, French, Portuguese, Spanish |
| Operating Conditions | -10~+50°C(operation temperature),0~95% RH(humidity), 0~5000m(altitude) |
| Power Supply | AC adaptor: 100~240V input voltage, 50/60Hz; 12V, 5A output voltage(DC) / 12V 8AH lithium battery |
| Monitor | 5 inches high Resolution colorful LCD display |
| Fiber image magnification | Simultaneous X and Y views with 400 times magnification |
| Storage of splice result | 6,000 groups of latest splice results |
| Splicing Model | Auto & Manual&Full-Auto |
| Optical Fiber Fixture | 3-in-1 cutting fixture; Multipurpose 1+N fixture |
| Dimensions | 130(W)*135(D)*130(H)mm |
| Weight | 1.90kg+0.38kg (battery weight)=2.28kg |
[ SKYCOM T-207X Fiber Optic Splicing Machine ]
> CE SGS CSI ISO9001 compliance
> Over 5-Year Experience in the field
> 5 patents for optical fiber fusion splicer machine
> OEM Service, Custom Make To Order
> Skycom Patented Fusion Splicer Series
> Fusion splicer is used for joining two optical fibers end-to-end using heat, to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice, and so that the splice and the region surrounding it are almost as strong as the virgin fiber itself.
> We has been dedicated to R & D, manufacturing fusion splicer for more than 5 years.
> Skycom T-207X is our latest developed product.It more concise and smaller in size.
> Our company have developed fusion splicer from 2010, and successfully obtained 5 patents for the fusion slicer research.
> Product Features of Fusion Splicer
> 5 inches high resolution colorful LCD display
> Average splice time: 10 seconds
> Average tube-heat time: 30 seconds
> Lithium battery: rechangable and up to 180 times of continuous splice and heat after fully charged.
> Simultaneous X and Y views with 400 times magnification
> Cutting-edge technology for image processing
> New developed technology providing wind and dust resistance
> Splicing mode: Auto & Manual&Full-Auto
> USB Port
> Storing 6,000 groups of splice results
> New technology of fiber core alignment, enhanced accuracy
> New 3-in-1 cutting fixture for rubber-insulated wire, pigtail & bare fiber (Patented technology)
> New Multipurpose 1+N fixture (Patented technology)
* 1+N: one 3-in-1 fixture ( for rubber-insulated wire, fiber optic pigtail, bare fiber) & optional fixtures ( for SC/LC/FC connector - T-207XF) .
> Product Parameters of Fusion Splicer
| Applicable Fibers | SM, MM, NZ-DS, EDF , Pigtail, Cable,( Rubber-insulated wire SC/LC/FC connector (optional function) |
| Average Splice Loss | 0.02dB(SM), 0.01dB(MM), 0.04dB(NZDS), 0.04dB(EDF) |
| Return Loss | ≥60dB |
| Tension Test | 2.0N(200gf)(Standard) |
| Typical splicing time | 10 seconds |
| Typical heating tim | 30 seconds |
| Splicing Program | 50 groups |
| Protection Sleeve Length | 20mm, 40mm, 60mm |
| Operating Language | Chinese, English, French, Portuguese, Spanish |
| Operating Conditions | -10~+50°C(operation temperature),0~95% RH(humidity), 0~5000m(altitude) |
| Power Supply | AC adaptor: 100~240V input voltage, 50/60Hz; 12V, 5A output voltage(DC) / 12V 8AH lithium battery |
| Monitor | 5 inches high Resolution colorful LCD display |
| Fiber image magnification | Simultaneous X and Y views with 400 times magnification |
| Storage of splice result | 6,000 groups of latest splice results |
| Splicing Model | Auto & Manual&Full-Auto |
| Optical Fiber Fixture | 3-in-1 cutting fixture; Multipurpose 1+N fixture |
| Dimensions | 130(W)*135(D)*130(H)mm |
| Weight | 1.90kg+0.38kg (battery weight)=2.28kg |
